Orthopedic devices for penis enlargement have been used by men for more than ten years and have proven positive. The most commonly used device is called expander, which is translated from English as expander or filler. This perfectly reflects its purpose. It is characterized by simplicity of design and assembly, which allows men to use both purchased (factory) and home-made expanders. This is quite easy to do. The main thing is to have the necessary materials and basic knowledge of the mechanics of the intimate apparatus.
Types and effects of extenders
The device works on the principle of diffusion of cavernous bodies. This occurs under conditions of regular tissue tension due to the periodic opening of the axes in the direction of increasing length. The growth of new tissues does not stop, cells divide under the constant influence of the distracting force.
According to user and manufacturer reviews, average growth rates are 2-5 centimeters of growth in 6 to 10 months. You should not expect instant results. This will require patience and regular use of the extender. Violation of this recommendation will result in not achieving the desired effect.
Depending on the connection method, extenders are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum expander
The floor is made using a special vacuum chamber. It surrounds the head of the penis with a circumference of about 3-7 centimeters. It is considered the most reliable and safe. The risk of injury is practically reduced to zero, as there is no risk of compression.
Extender for penis enlargement
Loop and belt expander
The mechanics of fastening are almost the same, but the form of fastening is different. In the first case, a loop is used, and in the second, a belt is used. The difference gives these species a significant difference.
The belt is covered with gauze, so the degree of compression is minimal. A loop, on the other hand, can squeeze the head strongly, disrupting the blood supply to the reproductive organ, but remains the most common option.
How to make an extender with your own hands at home?
You can do any of the three types of hardware listed. The most difficult to manufacture will be the vacuum, as you will have to make a chamber. Otherwise, there will be no significant differences in the process.
Drawings
Make a schematic diagram of the device yourself. To draw a drawing, it is enough to study the design of any well-known manufacturer. They draw their own sketch based on a photo, drawing, video. The length of the side posts is chosen based on the desired result. It can vary from 20 to 25 centimeters.
Required materials and tools
A home-made expander at home is assembled from the same parts as the factory. Specific materials depend on which structure is assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the width of the cross section of the penis. It is best to use a sterile dressing that is changed each time before use.
- Rods (side rods) are selected to fix the required length for a long time. These can be dies, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, such a homemade product will not work.
The difference between the devices is in the fastening element. If you decide to make a variety with a camera, you should prefer to buy a special jar, not a plastic bottle, as written in some sources. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic homemade expander
Step-by-step assembly instructions
The manufacture of a belt or loop device involves performing the following sequence of work:
- A penis with a diameter of 11 cm is cut from a piece of plywood or other material with a thickness of no more than 10 mm.
- The length of the rods is 20-30 cm, they are completely screwed into the plywood, a little remains above. The entrances are filled with glue.
- They screw a "lamb" to each.
- Strips are cut from a thin metal plate and holes are made in it.
- A clamp made of soft tubes or a belt that can be used as a medical wide tourniquet is inserted into the holes.
- Check the validity of the fixation.
The collection of the vacuum variety differs only in that it is attached to the end of a jar with pears. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius varies from 13 to 25 mm. It is selected according to the size of the reproductive organ. The strength of the clamp is ensured by a rubber sleeve. Its length should be at least 6 cm, it can be made of flexible surgical gloves.
Air will be pumped through a bulb or hose connector. You can use the tonometer element. The shut-off valve is removed from it and inserted from the other end. This allows you to change the working principle. Instead of expelling air, the pear will begin to expel it. As you can see, you will have to work with more than a strap and loop device.
To help you understand the principle of assembling an expander with your own hands at home, a video that clearly shows how the elements are connected, as well as what materials they are made of, will help.
Expander to enlarge the penis - it is attached below the knee
How and when to use?
The indicator for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organs or wants more. To increase the size of the phallus, it is necessary to wear a home-made or factory-made device for at least 4-6 hours a day. The design allows you to hide the expander under clothes. People around you will not feel anything.
Instructions for using the stretcher:
- The circle is placed on the slightly erect penis. The ring should fit perfectly over the pubic bone.
- The foreskin is retracted and a camera, loop or strap is attached to the glans. It is necessary to make sure that the blood flow is not disturbed (excessive pressure, changes in the shade of the integument).
- Adjust the length of the rods. There should be no painful sensations. The parameter gradually increases, allowing the body to get used to the degree of tension, that is, the phallus is trained.
If possible, massage his penis every hour. This allows it to quickly adapt to loads. After the allotted time, the device is removed and the meat is kneaded using special intimate creams. The device is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the ability to try the stretcher without buying a device;
- relative cheapness;
- obtaining a design that exactly matches the parameters of the phallus.
In fact, the advantages are very few. There are more negative aspects. These include the inconvenience of the product, because it is quite difficult to independently assemble a model that will ideally fold, put on, take off, and will not press or slide anywhere.
Which extender is better - factory or home?
To answer this question, it is enough to compare two types of models:
- A homemade product is heavier than factory models. This leads to the need to adjust each time so that the rods do not squeeze the head of the penis for a long time. Another point is that it is quite difficult to make a vacuum model. By the way, it is less effective than those made at home with a loop and strap.
- A cost shown as an advantage is a relative advantage. Today there are Chinese models that cost 1-3 thousand rubles. It is no more expensive than a homemade extender. No one will sell a half-meter hairpin or a 20-centimeter textolite. You will have to buy more material that will be empty. This makes it profitable to assemble the device with your own hands only if you have everything you need.
- The simplified design of the self-assembled device is not an advantage, but a disadvantage, because it will be inconvenient to use. You have to spend a lot of time to put on and take off, and considering that self-massage is recommended from time to time, it is also less effective.
One conclusion can be drawn - the factory device is better. You can simply buy a cheap model to try this method of penis enlargement
What are the risks when using a homemade device?
Experts and specialists do not recommend assembling an extender yourself without having the appropriate skills. If the device turns out to be "awkward", squeezes, squeezes, causes discomfort, it is not recommended to wear it. This can lead to unpleasant consequences.
Homemade expander
A well-assembled device will not be inferior to the factory in terms of efficiency. It will only be aesthetically pleasing. Otherwise, there will be no difference, but there is a nuance here. Many users write that with long-term use, hematomas, compressions and irritations occur in the dermis.
This may be due to low quality materials. It is almost impossible to find medical silicone in a pharmacy. If one is sold, its properties remain very undesirable, and long-term contact begins to show negative results.